Alloy stud surfacing welding roller

The roller material is mainly composed of Cr, Mo, V, W, Nb and other elements. The wear-resistant layer is placed on the outermost layer of the roller sleeve by centrifugal casting. The surface pattern is formed by casting.

The roller base material is mainly alloy steel + titanium carbide/tungsten carbide (stud), and the surface is welded with welding wire to form a wear-resistant layer.

Alloy stud surfacing welding roller is composed of roller shaft, special alloy compound roller sleeve and wear-resistant cemented carbide studs.The extrusion roller of alloy stud surfacing roller press has the following characteristics:

1.  The base metal is high-strength and high-toughness alloy cast steel, which can be welded;

2.  The corresponding alloy studs can be selected according to the working conditions. The wear resistance of the alloy studs is good, comparable to that of ceramets, and can be welded;

3.  In case of peeling of alloy studs under abnormal conditions, the studs can be replanted by overlaying, which is convenient and fast;

4.  The alloy stud forms a binding effect in the inlay welding structure, further improving the resistance of the alloy stud and the surfacing layer Abrasion and reliability;

5.  The surface of grinding roller has good peeling resistance and integrity; The integrity of the roll surface can be guaranteed when foreign matters enter, Quickly restore size.